Dental Direkt Designer by exocad®


A whole laboratory in one software – open for your creativity 

The design software Dental Direkt Designer by exocad® is the heart of the system. You create your dental models at the highest level and are herein supported in your work by the intuitive user interface. Safe preparation lines recognition and an automatic bridge design with joint configuration increase the efficiency of your working method. It is thus the perfect solution for CAD novices and advanced users alike. Even the basic version offers you an immense range of functions covering the majority of dental technical applications. Of course you can produce your construction in all commonly used materials. 

Indication of the basic software 

  • Inlays, onlays and veneers
  • Wax-ups
  • Primary telescopes
  • Reduced crowns and bridges
  • Copings and bridge frameworks of any span
  • Fully anatomical crowns

CAD Modules – more than just options 

Open for perfect data quality. Complete your 3D Designer® with CAD modules and use all capabilities to maximise your value-creation. 

DD Virtual Articulator
Art. no. Contents
S 105.1

The DD virtual articulator allows simultaneous construction in upper jaw and lower jaw, integrating Artex®-, Adesso Split®- or SAM® synchronisation systems. The integration of all patient values relevant to joints and cranium respectively is thus possible at construction. The finished bridge frameworks are dynamically reduced and require no post processing.

DD Abutment Creator
Art. no. Contents
S 104.1

For quicker and better creation of individual abutments. Create an individual emergence profile, system-dependent with or without adhesive bases. Current implant system are already included in the abutment library, such as e.g. Astra Tech®, Nobel Biocare®, Straumann®, Zimmer®, Dentsply Friadent® and Biomet®.

DD Bite Splint
Art. no. Contents
S 115.1

Creates in few work steps virtual therapeutic splints. Additional use of the DD virtual articulator module permits utilisation of the full spectrum.

DD Bridge module
Art. no. Contents
S 107.1

The DD Bridge module offers you an extensive profile selection. Create Dolder, Hader, Canada and hybrid bridges, as well as individual profiles as stump, abutment, or occlusally screwed bridging works.

DD Model Creator
Art. no. Contents
S 116.1

With the add-on module for models you create physical working models on the basis of scan data. Intraoral scans, or scan data from imprint scanners serve here as input data. The add-on module supports the creation of saw-cut models, as well as the creation of models that only allow for the removal of prepared tooth stumps.

DD Provisorium
Art. no. Contents
S 117.1

With this add-on module, you create individual temporary crowns and bridges using the “eggshell” technique. Based on a scan of the pre-operative situation, you can create the shape of the temporary crown or bridge by copying the original anatomy, or alternatively revert to a tooth library.

DD Tooth Library
Art. no. Contents
S 121.1

For those who want even more choice, the extensive library of natural teeth is just the right thing. The library includes 61 upper jaw anterior teeth and 19 lower jaw anterior, upper jaw posterior and lower jaw posterior sets respectively.

DD TruSmile
Art. no. Contents
S 109.1

Offers near-photorealistic renderings in real time, already during the design process. DD TruSmile is a high performance aesthetics module that permits the creation of natural tooth replacement constructions on screen. This makes the patient’s decision regarding choice of material easier.

DD DICOM Viewer
Art. no. Contents
S 114.1

This module includes an integrated DICOM viewer, which allows you to visualise Voxel data from CT machines already during the design process.

DD Full Dentures
Art. no. Contents
S132

With the Full Denture module, we offer you a digital solution for the design of full dentures. Digital analysis of model data facilitates suggestions for tooth positioning. The final designed dentures can then be shaped or printed.

Partial Framework
Art. no. Contents
S 131

The DD Partial Framework add-on module now facilitates the digital design of model casting works. An on-file library of various clamps, rest seats, saddles etc. ensures a quick and efficient workflow. The module ensures a secure design of transverse bars and their surface, with subsequent option of digital manufacture.

Contact us

Message
Subject
Contact data
Datenschutz
Yes, I have read the Privacy Policy note and I consent that the data provided by me, including the contact data, for the processing of the inquiry and in case of questions are electronically collected and stored. My data will only be used strictly for my request and will not be passed without my consent. This consent can be revoked any time with effect for the future.'