Deutsch
English
DD Bio Splint P HI
high impact thermoplastic
DD Bio Splint P HI blanks consist of thermoplastic acrylic polymer based on polymethylmethacrylate (PMMA), with no toxic or allergenic materials. Using CAD/CAM technology, you will achieve a perfect fit with no re-machining. With our DD Argus-Scan system and the DD Bite Splint module from Dental Direkt Designers by exocad®, you can build splints with adjusted surfaces. Thanks to our manufacturing process, the material is absolutely free of distortion and strain for a perfect fit.
Your benefits:
- biocompatible – medical thermoplastic, no chemoplatic!
- industrially polymerized – minimal residual monomer content
- high fracture resistance and long-term stability (bruxism treatment)
- lowest water absorption – long-term stability of the fit
- good polishing properties – smooth surface are less susceptible to discoloration and plaque deposits, which at the same time minimizes the risk of inflammation.
DD Bio Splint P HI for open systems Ø 98,5 mm
| Art. no. | Height (mm) |
|---|---|
| K40115 | 15 |
| K40120 | 20 |
| K40125 | 25 |
| K40130 | 30 |
Consult instructions for use
Physical specifications
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
|
Flexural strength |
[ISO 178] |
[MPa] |
92 |
|
Charpy impact strength, +23°C |
[ISO 179/1eU] |
[kJ/m²] |
45 |
|
Density |
[ISO 1183] |
[g/cm³] |
1,17 |
|
Water sorption |
[ISO 20795-1] |
[μg/mm³] |
0,02 |
|
Solubility |
[ISO 20795-1] |
[μg/mm³] |
0,0 |
|
Residual monomer content |
[ISO 20795-1] |
[%] |
<0,7 |
Chemical composition
| Polymethylmethacrylat (PMMA) | 100 |
Brochures
